BlueBird Pure Water Softener installation Step By Step - RBTUBE

8,674 • 60 • 14 • Nov, 27, 2018

Description.

Water Softener installation Step By Step. 1.Take the pressure vessel and brine tank, and place it on the place of installation. 2.Take out the Multiport Valve and their fittings from the white box. 3.Take the riser pipe, which is provided with this unit. Apply adhesive solvent at one end of the riser pipe and into the bottom strainer and fix the bottom strainer in it. Now put this pipe into the vessel. 4.The length of the pipe should be up to 2 inches high. Cut the length of the extra Pipe. 5.Now take out this pipe with fitted strainer from the vessel. Fill required quantity of Resin in pressure Vessel. 6.Now put this pipe with fitted bottom strainer into the pressure vessel and keep it in the centre of the vessel. 7.Take the Multi Port Valve and top strainer. Fix the top strainer into the Multiport Valve. Now fix the assembly of Multiport Valve and bottom strainer with the riser pipes into the vessel and tighten it hard. 8. Take a Union, apply Teflon tape on another end of the union and fix into the output port. Take 2nd Union, apply Teflon tape on another end of the union and fix into the input port. Take the third Union, apply Teflon tape on another end of the union and fix into the drain port. 9. Take A Pressure gauge, apply Teflon tape on it and fix in input union. 10.Take a Ball valve and fixed it on the Suction Port. (this is not provided with the unit. Shut the valve for sand filter use). 11. Rest of the FTA, MTA and CPVC fitting is not supplied with the product arrange and make them fit the pipe connections as showing in this video. 12. Fitment of Air Release Valve. 13. For Output water pipeline. 14. Bypass Connection. (if unit not functioning, water can be available in output water) 15. Bypass Connection. (if unit not functioning, water can be available in output water) 16. The output connection to the storage tank. 17. To service mode for purified water .

You maight also like.